Yes. Euphoric Colors can help source fabric for apparel development and production. We can review the customer's fabric direction, recommend suitable options, source locally when possible, and guide the customer based on garment type, fabric weight, stretch, hand feel, color, quantity, and production timeline.

Yes. Customers can provide their own fabric. Before production, we need to review the fabric for content, weight, stretch, recovery, shrinkage, defects, color consistency, yardage, and whether it is suitable for the garment construction.

Customers should provide fabric content, GSM or ounce weight, width, stretch percentage, color, finish, shrinkage information, supplier details, available yardage, and whether the fabric has already been washed, dyed, brushed, or finished.

That is okay. Euphoric Colors can help guide the fabric direction based on the garment type, reference images, target hand feel, fit, weight, stretch, and budget. Reference garments or fabric swatches are very helpful.

Fabric affects the cost, fit, shrinkage, sewing method, print method, dyeing, finishing, and final garment quality. A hoodie made with heavyweight fleece will price differently than one made with lighter French terry. A legging made with nylon/spandex will price differently than one made with cotton/spandex.

We can try to match the fabric direction, hand feel, weight, color, and quality as closely as possible. However, exact matching is not always guaranteed unless the original fabric source, mill, yarn, finish, and production lot are known.

GSM means grams per square meter. It measures fabric weight. A higher GSM usually means the fabric is heavier or thicker, but hand feel, yarn type, knit structure, and finishing also affect how the fabric feels.

No. GSM is usually a range, not an exact fixed number. Fabric weight can vary between rolls and lots because of knitting, finishing, washing, drying, compacting, brushing, and dyeing.

Not always. With heavier fleece, saying 390 GSM usually means the fabric is in a range, such as approximately 380-430 GSM. Exact 390 GSM on every roll or every yard is not realistic in normal fabric production.

Fleece goes through knitting, brushing, finishing, washing, drying, and compacting. These processes can slightly change the final weight and thickness. This is normal in fabric production.

Hand feel, body, softness, stretch, recovery, shrinkage, drape, thickness, surface texture, and how the fabric performs after washing are just as important as GSM.

Lightweight T-shirts are often around 150-170 GSM. Premium mid-weight T-shirts are often around 180-220 GSM. Heavyweight oversized tees may be 230-300 GSM depending on the desired look and feel.

Hoodies and sweatpants often use fleece or French terry from around 300-450 GSM. Heavy premium fleece can be 450-550 GSM or more depending on the desired thickness and structure.

Organic cotton refers to the cotton fiber itself. It means the cotton was grown organically. Organic cotton can be made into many different fabrics such as jersey, rib, French terry, fleece, or canvas.

Not by itself. Organic cotton is the fiber. The fabric type depends on how the yarn is knitted or woven. For example, organic cotton can become jersey, rib, fleece, French terry, or woven fabric.

Organic cotton means the cotton fiber is organic. Organic cotton terry means that organic cotton yarn was made into a terry fabric construction. Terry has loops or texture on the back side and is usually used for sweatshirts, sweatpants, and loungewear.

No. Organic cotton jersey is usually thinner and used for T-shirts or lighter tops. Organic cotton terry is heavier and has a looped back, making it better for sweatshirts, sweatpants, and loungewear.

Yes, depending on availability, quantity, color, certification needs, and timeline. Organic fabrics may require higher minimums or longer lead times than regular stock fabrics.

GOTS-certified fabric may be possible depending on the supplier and project. However, full GOTS certification requires documentation and supply chain compliance. This must be reviewed project by project.

Supima cotton is a premium cotton fiber known for softness, strength, and quality. It usually creates a smoother and more premium hand feel than standard cotton.

Ring-spun cotton is yarn made by twisting and thinning cotton fibers into a smoother, stronger yarn. It usually feels softer and more refined than open-end cotton.

Combed cotton is cotton that has been processed to remove shorter fibers and impurities. It creates a cleaner, smoother, softer yarn.

Carded cotton is less refined than combed cotton and can have a more textured, dry, vintage hand feel. It is often used for casual or vintage-style T-shirts.

Slub cotton has intentional thick and thin areas in the yarn, creating a textured, vintage, uneven look. It is common for relaxed T-shirts and casual garments.

Supima cotton is usually softer, stronger, smoother, and more premium. Regular cotton is more affordable but may not have the same refined hand feel or durability.

Jersey is a knit fabric commonly used for T-shirts, tops, dresses, baby tees, and lightweight garments. It usually has some natural stretch and a soft hand feel.

Yes. Jersey is one of the most common fabrics for T-shirts. The final feel depends on cotton type, GSM, yarn, finish, and whether it includes spandex or other fibers.

Cotton jersey is a knit fabric made from cotton yarn. It is commonly used for T-shirts, baby tees, casual tops, and basics.

Cotton/spandex jersey includes a small percentage of spandex for added stretch and recovery. It is often used for fitted tops, baby tees, dresses, and body-hugging garments.

No. Jersey is usually lighter and used for T-shirts or tops. Fleece is heavier, usually brushed on the inside, and used for hoodies, sweatshirts, and sweatpants.

French terry is a knit fabric with loops on the inside and a smoother face on the outside. It is commonly used for sweatshirts, sweatpants, hoodies, shorts, and loungewear.

Fleece is usually a heavier knit fabric with a brushed or soft interior. It is commonly used for hoodies, sweatpants, sweatshirts, joggers, and warm loungewear.

French terry usually has looped yarn on the inside and is less fuzzy. Fleece is usually brushed on the inside, making it softer, warmer, and more plush.

It depends on the garment. French terry is good for a cleaner, breathable, year-round sweatshirt feel. Fleece is better for a warmer, softer, cozy sweatshirt or sweatpant.

Sometimes the same base fabric direction can be finished differently. A fleece version may be brushed inside, while a terry version may remain looped and unbrushed.

Brushed fleece has been mechanically brushed on the inside to create a soft, fuzzy hand feel. It is common for premium hoodies and sweatpants.

3-end fleece is a heavier sweatshirt fleece construction often used for premium hoodies and sweatpants. It has a more structured and durable feel than basic fleece.

Rib is a knit fabric with raised vertical lines. It has good stretch and recovery and is commonly used for collars, cuffs, waistbands, neckbands, and fitted garments.

1x1 rib has alternating knit and purl stitches. It is commonly used for neckbands, cuffs, and fitted tops.

2x1 rib has a different rib structure and can feel thicker or more structured depending on yarn and GSM. It is often used for trims, waistbands, and fitted garments.

Rib has stretch and recovery, helping cuffs, collars, and waistbands hold their shape.

Yes. Rib fabric can be used for baby tees, tanks, dresses, fitted tops, and loungewear. The fabric must be tested for stretch, recovery, and shrinkage.

Spandex is an elastic fiber added to fabric to give stretch and recovery. It is commonly used in activewear, leggings, fitted tops, sports bras, and performance garments.

Elastane is another name for spandex. Both refer to stretch fiber used in fabrics.

4-way stretch means the fabric stretches both horizontally and vertically. It is important for activewear, leggings, sports bras, and fitted garments.

Recovery means how well a fabric returns to its original shape after being stretched. Good recovery is important for leggings, sports bras, fitted tops, and activewear.

Leggings usually need nylon/spandex or polyester/spandex with good 4-way stretch, recovery, compression, and opacity. Cotton/spandex can be used for lifestyle leggings, but it may not perform like true athletic fabric.

Sports bras usually need nylon/spandex or polyester/spandex performance fabric with good recovery, support, stretch, and durability. Lining, elastic, pads, and binding also affect fit and support.

Cotton/spandex can work for lifestyle activewear, light compression garments, fitted tops, and casual leggings. For high-performance athletic wear, nylon/spandex or polyester/spandex is usually better.

Compression fabric has strong stretch and recovery and holds the body firmly. It is common in leggings, biker shorts, and sports bras.

Activewear fabric must be tested for stretch, recovery, opacity, shrinkage, colorfastness, sewing performance, and comfort. Poor fabric can stretch out, become see-through, or lose shape.

Woven fabric is made by interlacing yarns. It usually has less stretch than knit fabric unless it includes spandex. Woven fabrics are used for shirts, pants, jackets, dresses, skirts, denim, canvas, and uniforms.

Twill is a woven fabric with a diagonal texture. It is commonly used for pants, jackets, uniforms, and structured garments.

Canvas is a durable woven fabric often used for jackets, bags, workwear, utility garments, and structured apparel.

Denim is a strong woven twill fabric commonly used for jeans, jackets, pants, and workwear-inspired garments.

Yes, if spandex or elastane is added. Stretch woven fabric is common for pants, fitted garments, and active lifestyle pieces.

Fabric dye means the fabric is dyed before cutting and sewing. This usually gives better color consistency and more control for production.

Garment dye means the finished garment is sewn first and then dyed. It gives a softer, washed, vintage, lived-in look.

Fabric dye is done before sewing and usually gives more consistent color. Garment dye is done after sewing and gives a vintage, washed, slightly irregular look.

Garment dye can create shade variation, light spotting, seam variation, and a vintage look. This is part of the process and should not always be considered a defect.

Garment dye can target a color, but exact shade matching is harder than fabric dye. Fabric type, thread, trims, washing, and dye lot can all affect the final color.

PFD means Prepared For Dye. PFD fabric or garments are prepared so they can be dyed properly.

PFD fabric is prepared to absorb dye evenly. Non-PFD fabric may create uneven color, shrinkage issues, or dye problems.

Not always. Polyester thread usually does not absorb cotton dye the same way cotton fabric does. This can leave stitching lighter or white after garment dye.

Yes, garment dye can cause shrinkage. Patterns and samples must account for shrinkage before production.

Shrinkage testing helps predict how fabric will behave after washing, dyeing, drying, and finishing. It is important for fit, measurements, and production accuracy.

Yes. Cotton can shrink, especially after washing, drying, garment dyeing, or high heat finishing.

Yes. Fleece can shrink depending on cotton content, finishing, dyeing, washing, and drying.

Spandex itself behaves differently than cotton, but fabrics with spandex can still shrink, twist, or change shape depending on construction and finishing.

It can be reduced and planned for through fabric testing, washing tests, compacting, and proper pattern adjustments, but it cannot always be eliminated completely.

Yes. Customers should approve fabric hand feel, weight, color, stretch, and shrinkage before bulk production.

Stock fabric is already available from a supplier and is faster for small runs. Custom fabric is made specifically for the project and usually requires higher minimums, more time, and setup costs.

Yes. For quantities like 12-50, 50-150, or small-batch production, stock fabric is usually the best option because custom fabric minimums can be too high.

Minimums vary by mill, fabric type, yarn, color, and finish. Heavy fleece or French terry may require around 300 units or more. Lightweight jersey or T-shirt fabric may require around 600 units or more.

Mills need minimum yarn, knitting, dyeing, and finishing quantities to run custom fabric efficiently. Small custom fabric runs are usually not cost-effective.

Yes. Euphoric Colors can source from Los Angeles fabric suppliers when available. Local sourcing is usually faster and better for small-batch production.

Yes. Deadstock fabric can be a good option for smaller runs, but we need to confirm yardage, consistency, defects, content, stretch, shrinkage, and whether enough fabric is available for the full order.

Deadstock fabric may not be reorderable. If the customer needs a reorder later, the exact fabric may no longer be available.

We can target Pantone colors, but final color matching depends on fabric content, dye method, finish, and supplier capability. Lab dips or strike-offs may be needed.

A lab dip is a small dyed fabric sample used to approve color before bulk dyeing.

A strike-off is a test print or test fabric sample used to approve print, color, artwork, or fabric direction before production.

Color can vary because of fiber content, dye lot, finishing, lighting, fabric texture, and production method.

Not always. Roll-to-roll shade variation can happen, especially with natural fibers, dye lots, and garment dye.

The best way is to approve fabric swatches, lab dips, strike-offs, or sample garments before bulk production.

No. Print method depends on fiber content, fabric texture, stretch, color, and artwork.

Cotton and cotton blends usually work well for screen printing. Stretch fabrics, fleece, rib, and textured fabrics may need testing.

Sublimation works best on polyester or high-polyester fabrics. It does not work well on 100% cotton.

Pure silk is not ideal for sublimation. Silk usually requires other printing methods such as digital, reactive, or acid printing depending on the project.

Yes, but it should be tested. Fleece texture, shrinkage, dyeing, and washing can affect puff print performance.

Yes. Oversized prints, all-over prints, or full-panel prints may need to be printed before cutting and sewing.

Oversized or panel printing requires extra setup, artwork placement, testing, cutting accuracy, and production handling.

Embroidery can work on many fabrics, but the result depends on fabric weight, stretch, stability, stitch count, backing, and artwork size.

Yes. Large embroidery can create puckering, tension, stiffness, or distortion, especially on fleece, garment-dyed garments, lightweight fabric, and stretch fabric.

Large embroidery has high stitch count and can pull on the fabric. Testing helps confirm stitch density, backing, thread, placement, and whether the garment can handle the design.

It depends. Embroidery before garment dye may be affected by dye and thread content. Embroidery after garment dye gives better thread color control but may affect finished garment handling.

Yes, but it must be tested. Stretch fabrics can pucker or distort if the embroidery is too large or dense.

Cotton jersey, combed cotton jersey, Supima jersey, carded cotton jersey, or heavyweight jersey can be used. The choice depends on the desired drape, hand feel, weight, and price.

Cotton/spandex jersey, ribbed cotton/spandex, or soft stretch jersey is usually good for baby tees because they need stretch, recovery, and a fitted shape.

Fleece, French terry, 3-end fleece, cotton/poly fleece, or 100% cotton fleece can be used depending on the desired weight, softness, structure, and price.

Fleece or French terry is commonly used for sweatpants. The best choice depends on whether the customer wants a cozy brushed interior or a cleaner loop-back terry feel.

Nylon/spandex or polyester/spandex performance fabric is usually best for leggings because it provides stretch, recovery, compression, and durability.

Nylon/spandex or polyester/spandex performance fabric is commonly used for biker shorts. Cotton/spandex can work for lifestyle biker shorts but may not have the same compression.

Nylon/spandex or polyester/spandex performance fabric with lining, elastic, and optional removable pads is usually best.

Cotton/spandex jersey, ribbed cotton/spandex, modal/spandex, bamboo/spandex, or nylon/spandex can work depending on the style.

Twill, gabardine, cotton/poly blends, stretch woven, performance woven, or durable knits can be used depending on the uniform type and required durability.

Denim, twill, canvas, nylon, fleece, wool blends, performance woven, or lined fabrics can be used depending on the jacket style.

Yes. Fabric should be reviewed before cutting for obvious defects, color issues, stretch, shrinkage, and suitability. However, fabric supplied by customers should also be inspected and approved by the customer before production.

Holes, stains, oil marks, shade variation, slubs, streaks, uneven dye, incorrect width, inconsistent stretch, poor recovery, and finishing issues.

Yes. Natural fibers, garment dye, vintage finishes, slub yarns, and brushed fabrics can have natural variation. Not every variation is a defect.

Textile tolerance means normal acceptable variation in fabric weight, color, shrinkage, width, stretch, and finishing. Fabric is not always exact from yard to yard or roll to roll.

Not always. In garment dye, vintage wash, slub fabric, and natural fibers, some variation can be part of the intended look. True contamination, oil marks, holes, or major stains are different and should be reviewed.

Customers should send enough yardage for sampling, testing, shrinkage, corrections, and production. They should also confirm fabric width, content, color, stretch, and whether more fabric can be reordered.

Extra fabric is needed for testing, shrinkage, mistakes, recuts, pattern matching, dyeing, sewing corrections, and production waste.

Only an estimate can be provided before the final pattern and marker are completed. Final consumption is confirmed after pattern, size breakdown, fabric width, and cutting layout are reviewed.

Production may be delayed, quantities may need to be reduced, or more fabric may need to be sourced. If the fabric cannot be reordered, the project may need adjustments.

Yes, especially if the fabric is unique or affects fit. The sample should be made in the actual or very similar fabric whenever possible.

Fabric is one of the biggest cost factors in apparel production. Fabric content, weight, width, dyeing, finishing, stretch, waste, and minimums all affect final price.

Heavyweight fabric uses more yarn, weighs more, costs more to dye and finish, and can be slower to cut and sew.

Stretch fabric often requires spandex, special knitting, more careful cutting, stretch stitches, special machines, and additional fit testing.

Small runs do not spread fabric sourcing, setup, testing, cutting, sewing, and finishing costs across many units. That makes each garment more expensive.

Custom fabric may require yarn sourcing, knitting, dyeing, finishing, lab dips, testing, and shipping. This takes longer than using stock fabric.

Pricing depends heavily on fabric, weight, construction, quantity, artwork, trims, labels, and finishing. Please send your tech pack, reference images, target fabric, GSM or ounce weight, quantity per style/color, size breakdown, artwork, trims, labels, packaging, and timeline so we can review and quote correctly.

No problem. Please send reference images, a sample garment, or a description of the hand feel and thickness you want. Euphoric Colors can help recommend a fabric weight and direction based on your garment type.

We can review the reference and try to match the fabric direction as closely as possible. Exact matching depends on fabric source, yarn, GSM, dye, finish, and availability. A physical sample is the best way to match hand feel and weight.

For 50 pieces, custom fabric may not be realistic because mills usually require higher minimums. We recommend using available stock fabric or local fabric options for the first run, then moving into custom fabric when the quantity increases.

Organic fabric may be possible depending on availability, certification requirements, color, GSM, and quantity. Please confirm whether you need organic fiber only or certified organic documentation such as GOTS.

Fabric choice controls the look, feel, fit, price, and performance of the garment. The best fabric depends on the garment type, desired hand feel, GSM, stretch, recovery, shrinkage, color, finish, and production quantity. Euphoric Colors can help review the project and recommend the best fabric direction before sampling and production.